Country Certification Services
Saudi Arabia – SABER Certification
For exports to Saudi Arabia, your products must be queried according to their HS Code numbers and registration procedures must be made. In Saudi Arabia, registration requirements vary according to product groups.
Before shipping to Saudi Arabia, you must make a HS Code inquiry and learn the necessary regulatory conditions for your product.
The basic requirements you need to have for registration are as follows:-ISO 9001 Quality Management System Certificate-Accredited test report of your products in accordance with SASO Standards-Risk Analysis Document-Invoice you prepared for export-Product and product label image
With the examination made by the Certplus Certification and Inspection Services Expert Team, you are helped to complete your missing documents.
The product registration process is concluded by issuing the PCoC as a result of the technical examination. The registration process is valid for 1 year.
After the registration process, a Loading Certificate specific to the export invoice you will make is issued. Shipment Certificates are reissued for registered products on a case-by-case basis.
Cosmetic Products: Products must be registered in the SFDA system. The registration process is one-time. After this process, a SASO certificate is issued from the FASEH system. SASO Certificate, on the other hand, is issued specifically for each shipment.
Food Products: Products must be registered in the SFDA system. After the registration process, the Shipment Certificate is issued from the SABER system. Loading Certificates are reissued for registered products on a case-by-case basis.
Lighting Fixtures: IECEE recognition certificate and Energy Efficiency Label must be issued for these products. For these regulations, the products must have a CB Test Report and Certificate for the last 3 years. If your products contain LEDs, they must have a SASO 2902 or SASO 2927 test report according to the product feature and Energy Efficiency Labels must be obtained according to these reports. Energy Efficiency Labels are available in 1 or 3 year options in their registration. After all these processes, the Installation Certificate is issued from the SABER system. Shipment Certificates are reissued for registered products on a case-by-case basis.
Household Appliances - Toys and similar products: G-Mark Certificate must be obtained for these products. For G-Mark requirements, you can review the G-Mark requirements under our Product Certification Services heading. After the G-Mark Certification process, the SABER registration of the products is carried out and these transactions are for 1 year. Afterwards, the Shipment Certificate is issued. Shipment Certificates are reissued for registered products on a case-by-case basis.
Marble-Ceramic – Industrial Kitchen etc. Products: These products require the SASO Quality Mark. For SASO Quality Mark requirements, you can review the SASO Q Mark requirements under our Product Certification Services heading.
Plastic Products Oxo-Biodegradable Certificate must be issued for these products. This process is mandatory for the export of plastic products to Saudi Arabia. A test report showing the Oxo-Biodegradable content of the product and a factory audit based on ISO 9001 are mandatory for this certification service. This certification is for 1 year. After the relevant certification process, the Shipment Certificate is issued. Shipment Certificates are reissued for registered products on a case-by-case basis.
Other Finished Products: you are going to ship a product other than the above-mentioned products, please share the HS Code number of your product with our expert team and have the regulation checked. If the products are within the scope, SABER registration will be made and this registration is valid for 1 year. Afterwards, a Shipment Certificate will be issued. Shipment Certificates are reissued for registered products on a case-by-case basis. If your product is out of scope, it will be sufficient to issue only a Shipment Certificate.
United Arab Emirates – EQM and ECAS Certificate
In exports to the UAE, there are different requirements and regulations according to the type of products. As a result of these requirements, the need for 2 different documents arises. These are ECAS and EQM. In addition, even if all these certifications are not mandatory for your products, you can get these certifications in the UAE to show your quality and have a strong position in the market.
ECAS Certificate is a certification service obtained as a result of a 1-year registration process. A registration process is carried out with the importer in the UAE. It is a service based on the technical inspection of products. Test reports of the products accredited in accordance with GSO standards and made within the last 3 years are sought. The suitability of the labels of the products is evaluated. The main product groups included in this scope are as follows; Low Voltage Electrical Devices,Food Contact Materials,Cosmetics,Perfumes, etc.
EQM Certificate The common and well-known name among the people is the ESMA Certificate, which is also the old name of the MOIAT institution that issues the certificate. Bottled Drinking Water, Soda, Mineral water, milk and dairy products, fruit juices are examples of products subject to this certification. A factory audit is a requirement for EQM Certification. In addition, the technical specifications of the product are examined with the test reports of the products and the conformity of the label of the product is checked.
Certplus conducts EQM Certification audits in-house with its expert and authorized auditor staff. We are among the rare companies in Turkey that carry out this transaction with the Turkish Auditor staff. Do not forget to inquire about the authorization certificate and the competencies of the auditors before applying. This will protect you against unwanted delays and situations.
Morocco – VoC
For exports to Morocco, the Moroccan Government requires Certification for certain product groups. For this, it is very important that you consult our expert team before exporting and have it checked with the HS Code number. The Moroccan Ministry of Industry and Trade (MCI) has established a 'Verification of Conformity (VoC)' program to certify that products imported into Morocco comply with national regulations for product quality and safety. The VoC program has been valid since February 1, 2020.
Certain consumer and industrial products intended for import into Morocco must be tested against local NM standards that are partially compliant with ISO or EN standards. Depending on the regulated product categories (see 'Covered Products' above), a pre-shipment inspection must be carried out in the exporting country or in the territory of Morocco (Destination Inspection). In both cases, the conformity assessment ends with a Certificate of Conformity (CoC), which shows that the products meet the relevant standards and regulations.
Certificate Validity: The Certificate of Conformity is valid only for approved shipment and becomes invalid as soon as the goods are cleared at the Moroccan border point.
The following product groups are examples of products that are subject to certification:
Automotive spare parts (speciality), Electrical products specialty, Plastic products, Construction material specialty, Leather, textiles & clothing, Food contact product, Chemical products, Gas stoves, Personal protective equipment, Children's toys, Home appliances
Certplus Certification and Inspection Services is always ready to assist you with its expert team.
Nigeria - SONCAP
For exports to Nigeria, there is an annual registration process of the products and the SONCAP certificate issued for each shipment.
Depending on your product type, product registration is carried out with PC1, PC2 or PC3 certificate.
Example product groups:
I-Chemical products,
II-Textiles and textile products,
III-Shoes,
IV-Toys and child care products,
V-Electrical (including Electrical Installations) and Electronic products,
VI- Mechanical products,
VII- LPG cylinders and accessories for gas and gas stoves,
VIII- Other (Hurricane Lights, Mortise Locks, Nail Hand Tools, Bicycle, Auto spare parts, Shock Absorbers, Fan Belts, Seat Belts, Brake Pads, Spark Plugs...)
Afterwards, the SONCAP certificate is prepared according to the invoice you have issued for export and presented to you.
Certplus Certification and Inspection Services is always ready to assist you with its expert team.
Egypt - GOEIC registration and CoI
For exports to Egypt, your factory or company must be registered with the GOEIC institution as a priority. During this registration process, your products are registered with the brand that you own or are officially authorized to use.
Some of the basic documents required for registration are as follows;
-
ISO 9001 Certificate
-
Trademark Registration
-
Product List
-
Commercial Registration / Industrial Registration
When you want to send your products to Egypt as a result of the registration process, you must have accredited test reports of your products that meet the Egyptian Standards. Then, a special CoI (Certificate of Inspection) is issued for each shipment.
All these processes are carried out in the fastest way by the expert team of Certplus Certification and Inspection Services.
Tanzania - PVoC
For exports to Tanzania, there is a certification process called Pre-Shipment Conformity Approval. It is important that you do not install without this process. Be sure to consult our expert team before exporting to Tanzania.
The product groups in scope for Tanzania are as follows;
-
Toys and child care products,
-
Electrical and electronic products,
-
automotive products,
-
Chemical products and household products (furniture, paper products),
-
Mechanical materials and gas tools,
-
Food and agricultural products,
-
Selected safety equipment,
-
used products,
Certplus Certification and Inspection Services is always ready to help you with its expert team.
Kenya – PVoC
Kenya Bureau of Standards (KEBS) has introduced certain regulations for exports to Kenya. As a result of these regulations, the Pre-Export Conformity Approval (PvoC) has come into play. A certificate of conformity is mandatory for customs clearance of shipments to Kenya.
It is the responsibility of the supplier or manufacturer to ensure all such compliance.
Before exporting to Kenya, make sure to inquire about your products with our expert team. In order to avoid problems with your shipment and to avoid heavy penalties, be sure to obtain your Certificate of Conformity.
Certplus Certification and Inspection Services is always ready to assist you with its expert team.
Kuwait - KUCAS
For shipments to Kuwait, you must meet the requirements of the Kuwait Conformity Assurance Framework (KUCAS).
Before shipments to Kuwait, Technical Inspection Reports (TIR) and Technical Evaluation Reports (TER) of your products must be obtained.
The inspection of the products and the test reports of the relevant legislation form the basis of this certification.
Before exporting to Kuwait, be sure to consult our Certplus Certification and Inspection Services expert team and get information.
Iraq - CoC
Different certification services are used for Northern and Southern Iraq for shipments to Iraq. Before shipment, you can make an inquiry about whether your product is in scope by specifying the destination city of shipment.
Afterwards, the certification process is carried out with the accredited test reports of the product and the physical inspections of the products.
Without your Certificate of Conformity, you can wait for a long time at the Iraqi border and pay a large amount of storage costs. In order to prevent this, be sure to consult our Certplus Certification and Inspection Services expert team before shipping to Iraq.
Algeria - CoC
For shipments to the Algeria country, there is a request for a certificate of conformity with a physical inspection before shipment. This situation is also included in the accredited text in accredited transactions.
Before Shipment, please contact our Certplus Certification and Inspection Services expert team and get information about the conformity certificate based on inspection.
Russia – EAC
The country of Russia requires EAC for bonded products. EAC certificate is a certification system that is regulated based on the technical specifications of the product. A one-time service is taken for the products.
A preliminary examination is made with the information containing the technical specifications of your products, and then guidance is made.
Certplus Certification and Inspection Services is always ready to assist you with its expert team.